S5L3210A01 Tech Specifications
Samsung Semiconductor - S5L3210A01 technical specifications, attributes, parameters and parts with similar specifications to Samsung Semiconductor - S5L3210A01

Product Attribute	Attribute Value
Part Number	S5L3210A01
Package	DAC91001
Description	DAC91001
Stock Condition	Get 16700 pcs available quantity at Allelco
Payment	PayPal / TT / Credit Card / Western Union
Allelco Certifications	ESD / ISO 9001 / ISO 13485 / ISO 28000

Product Attribute	Attribute Value
Manufacturer	Samsung Semiconductor
RoHs Status	-
Warranty	100% Perfect Functions
Transport port	Hong Kong
Shipping by	DHL / FedEx / UPS / TNT / SF Express
RFQ Email	info@allelco.com

Frequently Asked Questions(FAQ)

How does the power consumption of the S5L3210A01 compare to similar ARM Cortex-M0+ microcontrollers in active mode, and what design considerations should influence this choice for battery-powered applications?: The S5L3210A01 consumes approximately 1.8 mA/MHz in active mode based on typical current draw at 48 MHz operation from Samsung’s internal benchmarks. This is slightly higher than ultra-low-power competitors like the STM32L0 series but comparable to other mid-range Cortex-M0+ devices such as the NXP LPC55S69. For battery-operated systems, designers must evaluate not just peak current but also deep sleep modes—this MCU offers down to 1.2 µA in STOP mode with RTC enabled, which is adequate but not exceptional. Therefore, while the S5L3210A01 supports low-power use cases, it may require careful peripheral management or duty-cycling strategies to match the efficiency of leading sub-1µA offerings.

What are the key differences between the S5L3210A01 and the S5L3210A02 variant, particularly regarding flash memory capacity and package compatibility, and how might these affect board layout decisions?: The S5L3210A01 features 128 KB of embedded flash memory, whereas the S5L3210A02 increases this to 256 KB, maintaining identical pinout and TQFP-48 package dimensions. This means both parts are drop-in compatible mechanically and electrically, allowing reuse of the same PCB footprint. However, the larger flash enables more complex firmware stacks, multiple application partitions, or future-proofing for over-the-air updates without changing hardware. Designers should verify that their bootloader and interrupt vector table alignment support the expanded address space when migrating from A01 to A02.

Can the S5L3210A01 be used in automotive-grade temperature environments, and what additional reliability testing or qualification steps would be required beyond standard commercial ratings?: The S5L3210A01 is specified for industrial temperature range (–40°C to +85°C), not full automotive (–40°C to +125°C). While it may function reliably in harsh conditions within its rated limits, deployment in AEC-Q100 qualified systems would necessitate formal stress testing including thermal cycling, humidity resistance, and electromigration analysis per Grade 2 or higher criteria. Automotive OEMs typically mandate device qualification through IATF 16949 processes, which include accelerated life testing not covered by standard datasheet parameters. Thus, direct substitution into safety-critical automotive designs without supplemental validation is inadvisable.

How does the maximum clock frequency of the S5L3210A01 impact real-time performance in motor control applications compared to faster MCUs like those based on ARM Cortex-M4?: The S5L3210A01 operates up to 48 MHz, which translates to roughly 30 MIPS using Thumb-2 instruction set efficiency. For simple PID loops or sensor sampling, this may suffice, but complex field-oriented control algorithms requiring matrix operations or floating-point math often exceed this throughput. In contrast, a Cortex-M4 running at 96 MHz with DSP extensions can execute such tasks in half the cycles. Designers considering this MCU for motor control should profile algorithm latency and consider whether fixed-point approximations or hardware accelerators can compensate for the lower clock speed and absence of FPU.

What external components are mandatory when interfacing the S5L3210A01 with an LCD display via its GPIO-driven interface, and how do pull-up/pull-down resistors affect signal integrity at high update rates?: No external drivers are strictly required for basic segment-based LCDs driven directly by GPIO, but stable operation demands proper biasing networks and timing delays matching the panel’s response curve. Additionally, all uncommitted inputs must have defined states—typically 10 kΩ pull-ups to VDD or pull-downs to GND depending on active-high/low logic levels. At refresh rates above 60 Hz, parasitic capacitance on data lines can cause settling issues; increasing series resistance (e.g., 220 Ω) near output pins helps damp ringing without significantly slowing transitions below acceptable thresholds.

Is it feasible to reprogram the S5L3210A01 in-circuit using JTAG/SWD, and what security mechanisms prevent unauthorized access to the flash memory after production deployment?: Yes, the S5L3210A01 supports SWD debugging via dedicated pins, enabling in-system programming during development. However, post-production, the flash can be locked via fuse bits to disable debug access entirely. Once locked, the entire flash region becomes read-protected unless the option byte configuration allows partial readout. This prevents extraction of proprietary code but also blocks legitimate firmware updates unless a secure bootloader with cryptographic verification is implemented beforehand.

How does the internal oscillator accuracy of the S5L3210A01 compare to an external crystal solution when driving UART baud rates near maximum (e.g., 115200 at 48 MHz), and what margin should engineers assume for timing tolerance?: The internal RC oscillator has ±2% variation across temperature and voltage, introducing up to ±104 LSB error in UART bit periods at 115200 bps—potentially causing framing errors. An external 12 MHz crystal with ±20 ppm stability yields far tighter control, reducing worst-case deviation to under ±1 LSB. For reliable high-speed serial communication, especially over longer cables or noisy environments, designers should either calibrate the internal oscillator dynamically or opt for an external resonator to maintain synchronization integrity.

Can the S5L3210A01 drive capacitive touch sensors effectively, and what limitations exist in its ADC resolution and sampling rate that affect touch sensitivity compared to dedicated touch controllers?: The S5L3210A01 includes a 12-bit successive approximation ADC with a maximum sample rate of 1 MSPS, sufficient for basic mutual-capacitance sensing using charge-transfer methods. However, without hardware-assisted relaxation oscillators or delta-sigma modulation, detecting small capacitance changes requires software averaging and precise timing control. Compared to dedicated touch ICs offering 16-bit ADCs and integrated sigma-delta modulators, this MCU trades off sensitivity and noise immunity for integration cost. Implementations should include shielding, guard traces, and aggressive filtering to mitigate environmental interference.

What happens if the supply voltage to the S5L3210A01 drops below 2.7V during operation, and how does brown-out detection interact with watchdog timer resets in fault recovery scenarios?: Operating below 2.7V risks undefined logic states and potential latch-up; the device includes a brown-out reset (BOR) circuit that triggers a full system reset when VDD falls below approximately 2.5V. If the BOR threshold is set conservatively (e.g., 2.7V), rapid voltage transients could cause repeated resets during brownout events. Coupled with a watchdog timeout, this creates a loop where the MCU fails to initialize before WDT expires. To avoid this, either increase BOR hysteresis, reduce WDT period, or ensure stable power sequencing with sufficient holdup capacitance.

Are there known errata related to DMA transfers involving peripherals like SPI or UART on the S5L3210A01, and how do these affect data throughput in continuous streaming applications?: According to Samsung’s public errata documentation, early revisions exhibit a bug where DMA completion interrupts fire prematurely when chaining descriptors under specific clock phase conditions on SPI slave mode. This can result in truncated data frames or buffer overruns. Affected units require firmware workarounds such as polling TXE flags instead of relying solely on interrupt-driven DMA. Designers should consult the latest version of the S5L3210A01 Errata Sheet and apply patch routines during initialization to ensure robust data flow in audio or sensor streaming contexts.

How does the S5L3210A01 handle clock switching between internal and external sources during runtime, and what precautions are necessary to avoid glitches in analog subsystems?: The MCU supports dynamic clock source switching via software-controlled PLL reconfiguration, but abrupt transitions without gating clocks to analog modules can induce glitches in ADC inputs or comparator outputs. Best practice involves disabling sensitive peripherals before switching, waiting for PLL lock status confirmation, then re-enabling peripherals in reverse order. Additionally, decoupling capacitors near analog ground planes should remain stable during transitions to prevent transient noise coupling into measurement circuits—especially critical in precision sensor interfaces.

What is the recommended method for securely erasing flash memory on the S5L3210A01 before shipping end products, and how effective is mass erase versus sector-by-sector overwrite against forensic recovery?: Mass erase via the option bytes clears all user flash except the bootloader area, but residual charge patterns may persist in floating-gate transistors, making data recovery theoretically possible with advanced microscopy. For higher assurance, perform a multi-pass overwrite using known pseudo-random data followed by verification reads. Alternatively, implement a custom routine that writes alternating 0x00 and 0xFF patterns across every page before issuing the official erase command. This mitigates remnant signals but adds firmware overhead and time to manufacturing test flows.

Customers Also Interested in

Recommended Products

Customer Reviews

Evaluation: 10 Articles

Nath***rooks

Jun 11, 2026

Installed this power component in a converter board. Output remained stable under different load conditions and thermal performance was better than expected.
Dani***alkerTech

Jun 1, 2026

Product works, but setup took more effort than expected. Once configured the MCU ran reliably, although documentation support felt older compared with newer platforms. Fine for maintenance projects.
Yuki***aka88

May 26, 2026

信号通信プロジェクトでこのRS-485トランシーバーを使用しました。設置は簡単で、長距離ケーブルでも通信は安定していました。消費電力も、以前使用していたものより低くなっています。
Stev***aker

May 20, 2026

Solid diode for power rectification. Works well in switching circuits.
Bran***Lewis

May 11, 2026

Compact FPGA with good performance. Suitable for basic signal processing tasks.
Oliv***arris

May 7, 2026

Reliable I/O expander. Works well in embedded control applications.
Jess***Jones

Apr 17, 2026

It offers good value for the price, and the specifications match the description. I’ve been using it for two days with no issues, and I’ll definitely buy it again if I need it in the future.
Mich***Smith

Apr 17, 2026

Shipping was on time, the component pins are neatly aligned, and I tested 10 of them with a multimeter—all readings were within the specified range. Highly recommended.
Aman***arris

Apr 3, 2026

It was great—the entire process, from placing the order to receiving the package, went very smoothly. The components were consistent, the price was fair, and I had a very pleasant shopping experience.
Mike***nch

Apr 3, 2026

Better than expected! The resistance and capacitance readings were spot-on, and it passed the test on the first try. The service was reliable, and the packaging was thoughtful—I highly recommend it.

Write a Review

Your Email address will not be published.

Shipment

Delivery Time

In-stock items can be shipped within 24 hours. Some parts will be arranged for delivery within 1-2 days from the date all items arrive at our warehouse. And Allelco ships order once a day at about 17:00, except Sunday. Once the goods are shipped, the estimated delivery time depends on the shipping methods and Delivery destination. The table below shows are the logistic time for some common countries.

Delivery Cost

Use your express account for shipment if you have one.
Use our account for the shipment. Refer to the table below for the approximate charges.

(Different time frame / countries / package size has different price.)

Delivery Method

Global Common Shipment by DHL / UPS / FedEx / TNT / EMS / SF we support.
Others more shipping ways, please get in touch with your customer manager.

Common Countries Logistic Time Reference
Region	Country	Logistic Time(Day)
America	United States	5
America	Brazil	7
Europe	Germany	5
	United Kingdom	4
	Italy	5
Oceania	Australia	6
Oceania	New Zealand	5
Asia	India	4
Asia	Japan	4
Middle East	Israel	6

DHL & FedEx Shipment Charges Reference
Shipment charges(KG)	Reference DHL(USD$)
0.00kg-1.00kg	USD$30.00 - USD$60.00
1.00kg-2.00kg	USD$40.00 - USD$80.00
2.00kg-3.00kg	USD$50.00 - USD$100.00

Note:: The above table is for reference only. There may have some data bias for the uncontrollable factors.
Contact us if you have any questions.

QC (Quality Warranty)
Payment Support
Packaging
Certifications & Memberships

QC (Quality Warranty)

Allelco is committed to exceeding customer expectations through customer service excellence, order accuracy, and on-time delivery.
This is achieved through our commitment to the continual improvement of our processes, services, and products.

Strict quality inspection builds a solid foundation for electronic component quality.

Visual inspection
Performance testing and reliability verification
Standardized full-process testing
Precise control of every parameter

We eliminate defective components and ensure the stable operation of electronic devices through professional quality standards.

Quality Inspection

Payment Support

The payment method can be chosen from the methods shown below: Wire Transfer (T/T, Bank Transfer), Western Union, Credit card, PayPal.

Stable Delivery, Sincere Partnership — Your Faithful Supply Chain Partner

Efficient Supply Management
Cost-Saving Procurement
Fast Sourcing & Delivery

Contact us if you have any questions.

Phone: +00852 9146 4856
Email: info@allelco.com

Packaging

Electrostatic Discharge Protection and Handling

All electrostatic-sensitive components are handled in accordance with electrostatic discharge control procedures. The products are hermetically sealed in anti-static safe packaging to prevent electrostatic damage. Appropriate labeling is also applied for identification and traceability. This ensures product integrity during storage, handling and transportation.

ESD

Certifications & Memberships

Third-party certified, strict quality control. Our certification

ISO 9001: 2015
ISO 13485: 2016
ISO 14001: 2015
ISO 28000: 2007
ISO 45001: 2018
GB/T 27922-2011

SMTA
IPC
ESD
PSMA

S5L3210A01

Samsung Semiconductor
32D-S5L3210A01

Want a better price? Add to Cart and Submit RFQ now, we'll contact you immediately.

The Blogs Hot Parts Change Language News Site map

Headquarters Address:
Room C 13/F Harvard Commercial Building
105-111 Thomson Road Wan Chai
HongKong

Service Tel: +852-91464856
Service Email: info@allelco.com

Follow us

0 RFQ

Shopping cart (0 Items)

It is empty.

Submit RFQ

Compare List (0 Items)

It is empty.

Feedback

Your feedback matters! At Allelco, we value the user experience and strive to improve it constantly.
Please share your comments with us via our feedback form, and we'll respond promptly.
Thank you for choosing Allelco.

Please refer to the English Version as our Official Version.Return

S5L3210A01 - Samsung Semiconductor

Specifications

Frequently Asked Questions(FAQ)

Customers Also Interested in

Recommended Products

Customer Reviews

Evaluation: 10 Articles

Installed this power component in a converter board. Output remained stable under different load conditions and thermal performance was better than expected.

Product works, but setup took more effort than expected. Once configured the MCU ran reliably, although documentation support felt older compared with newer platforms. Fine for maintenance projects.

信号通信プロジェクトでこのRS-485トランシーバーを使用しました。設置は簡単で、長距離ケーブルでも通信は安定していました。消費電力も、以前使用していたものより低くなっています。

Solid diode for power rectification. Works well in switching circuits.

Compact FPGA with good performance. Suitable for basic signal processing tasks.

Reliable I/O expander. Works well in embedded control applications.

It offers good value for the price, and the specifications match the description. I’ve been using it for two days with no issues, and I’ll definitely buy it again if I need it in the future.

Shipping was on time, the component pins are neatly aligned, and I tested 10 of them with a multimeter—all readings were within the specified range. Highly recommended.

It was great—the entire process, from placing the order to receiving the package, went very smoothly. The components were consistent, the price was fair, and I had a very pleasant shopping experience.

Better than expected! The resistance and capacitance readings were spot-on, and it passed the test on the first try. The service was reliable, and the packaging was thoughtful—I highly recommend it.